CanonCustom Functions1D Tags

These custom functions are used by all 1D models up to but not including the Mark III.

Tag IDTag Name WritableValues / Notes
0 FocusingScreen int8u 0 = Ec-N, R
1 = Ec-A,B,C,CII,CIII,D,H,I,L
1 FinderDisplayDuringExposure int8u 0 = Off
1 = On
2 ShutterReleaseNoCFCard int8u 0 = Yes
1 = No
3 ISOSpeedExpansion int8u 0 = No
1 = Yes
4 ShutterAELButton int8u 0 = AF/AE lock stop
1 = AE lock/AF
2 = AF/AF lock, No AE lock
3 = AE/AF, No AE lock
5 ManualTv int8u 0 = Tv=Main/Av=Control
1 = Tv=Control/Av=Main
2 = Tv=Main/Av=Main w/o lens
3 = Tv=Control/Av=Main w/o lens
6 ExposureLevelIncrements int8u 0 = 1/3-stop set, 1/3-stop comp.
1 = 1-stop set, 1/3-stop comp.
2 = 1/2-stop set, 1/2-stop comp.
7 USMLensElectronicMF int8u 0 = Turns on after one-shot AF
1 = Turns off after one-shot AF
2 = Always turned off
8 LCDPanels int8u 0 = Remain. shots/File no.
1 = ISO/Remain. shots
2 = ISO/File no.
3 = Shots in folder/Remain. shots
9 AEBSequenceAutoCancel int8u 0 = 0,-,+/Enabled
1 = 0,-,+/Disabled
2 = -,0,+/Enabled
3 = -,0,+/Disabled
10 AFPointIllumination int8u 0 = On
1 = Off
2 = On without dimming
3 = Brighter
11 AFPointSelection int8u 0 = H=AF+Main/V=AF+Command
1 = H=Comp+Main/V=Comp+Command
2 = H=Command only/V=Assist+Main
3 = H=FEL+Main/V=FEL+Command
12 MirrorLockup int8u 0 = Disable
1 = Enable
13 AFPointSpotMetering int8u 0 = 45/Center AF point
1 = 11/Active AF point
2 = 11/Center AF point
3 = 9/Active AF point
14 FillFlashAutoReduction int8u 0 = Enable
1 = Disable
15 ShutterCurtainSync int8u 0 = 1st-curtain sync
1 = 2nd-curtain sync
16 SafetyShiftInAvOrTv int8u 0 = Disable
1 = Enable
17 AFPointActivationArea int8u 0 = Single AF point
1 = Expanded (TTL. of 7 AF points)
2 = Automatic expanded (max. 13)
18 SwitchToRegisteredAFPoint int8u 0 = Assist + AF
1 = Assist
2 = Only while pressing assist
19 LensAFStopButton int8u
0 = AF stop
1 = AF start
2 = AE lock while metering
3 = AF point: M -> Auto / Auto -> Ctr.
4 = AF mode: ONE SHOT <-> AI SERVO
5 = IS start
20 AIServoTrackingSensitivity int8u 0 = Standard
1 = Slow
2 = Moderately slow
3 = Moderately fast
4 = Fast
21 AIServoContinuousShooting int8u 0 = Shooting not possible without focus
1 = Shooting possible without focus

CanonCustom Functions5D Tags

Tag IDTag Name WritableValues / Notes
0 FocusingScreen int8u 0 = Ee-A
1 = Ee-D
2 = Ee-S
1 SetFunctionWhenShooting int8u 0 = Default (no function)
1 = Change quality
2 = Change Parameters
3 = Menu display
4 = Image replay
2 LongExposureNoiseReduction int8u 0 = Off
1 = Auto
2 = On
3 FlashSyncSpeedAv int8u 0 = Auto
1 = 1/200 Fixed
4 Shutter-AELock int8u 0 = AF/AE lock
1 = AE lock/AF
2 = AF/AF lock, No AE lock
3 = AE/AF, No AE lock
5 AFAssistBeam int8u 0 = Emits
1 = Does not emit
6 ExposureLevelIncrements int8u 0 = 1/3 Stop
1 = 1/2 Stop
7 FlashFiring int8u 0 = Fires
1 = Does not fire
8 ISOExpansion int8u 0 = Off
1 = On
9 AEBSequenceAutoCancel int8u 0 = 0,-,+/Enabled
1 = 0,-,+/Disabled
2 = -,0,+/Enabled
3 = -,0,+/Disabled
10 SuperimposedDisplay int8u 0 = On
1 = Off
11 MenuButtonDisplayPosition int8u 0 = Previous (top if power off)
1 = Previous
2 = Top
12 MirrorLockup int8u 0 = Disable
1 = Enable
13 AFPointSelectionMethod int8u 0 = Normal
1 = Multi-controller direct
2 = Quick Control Dial direct
14 ETTLII int8u 0 = Evaluative
1 = Average
15 ShutterCurtainSync int8u 0 = 1st-curtain sync
1 = 2nd-curtain sync
16 SafetyShiftInAvOrTv int8u 0 = Disable
1 = Enable
17 AFPointActivationArea int8u 0 = Standard
1 = Expanded
18 LCDDisplayReturnToShoot int8u 0 = With Shutter Button only
1 = Also with * etc.
19 LensAFStopButton int8u
0 = AF stop
1 = AF start
2 = AE lock while metering
3 = AF point: M -> Auto / Auto -> Ctr.
4 = ONE SHOT <-> AI SERVO
5 = IS start
20 AddOriginalDecisionData int8u 0 = Off
1 = On

CanonCustom Functions10D Tags

Tag IDTag Name WritableValues / Notes
1 SetButtonWhenShooting int8u 0 = Normal (disabled)
1 = Image quality
2 = Change parameters
3 = Menu display
4 = Image playback
2 ShutterReleaseNoCFCard int8u 0 = Yes
1 = No
3 FlashSyncSpeedAv int8u 0 = Auto
1 = 1/200 Fixed
4 Shutter-AELock int8u 0 = AF/AE lock
1 = AE lock/AF
2 = AF/AF lock, No AE lock
3 = AE/AF, No AE lock
5 AFAssist int8u 0 = Emits/Fires
1 = Does not emit/Fires
2 = Only ext. flash emits/Fires
3 = Emits/Does not fire
6 ExposureLevelIncrements int8u 0 = 1/2 Stop
1 = 1/3 Stop
7 AFPointRegistration int8u
0 = Center
1 = Bottom
2 = Right
3 = Extreme Right
   4 = Automatic
5 = Extreme Left
6 = Left
7 = Top
8 RawAndJpgRecording int8u
0 = RAW+Small/Normal
1 = RAW+Small/Fine
2 = RAW+Medium/Normal
   3 = RAW+Medium/Fine
4 = RAW+Large/Normal
5 = RAW+Large/Fine
9 AEBSequenceAutoCancel int8u 0 = 0,-,+/Enabled
1 = 0,-,+/Disabled
2 = -,0,+/Enabled
3 = -,0,+/Disabled
10 SuperimposedDisplay int8u 0 = On
1 = Off
11 MenuButtonDisplayPosition int8u 0 = Previous (top if power off)
1 = Previous
2 = Top
12 MirrorLockup int8u 0 = Disable
1 = Enable
13 AssistButtonFunction int8u 0 = Normal
1 = Select Home Position
2 = Select HP (while pressing)
3 = Av+/- (AF point by QCD)
4 = FE lock
14 FillFlashAutoReduction int8u 0 = Enable
1 = Disable
15 ShutterCurtainSync int8u 0 = 1st-curtain sync
1 = 2nd-curtain sync
16 SafetyShiftInAvOrTv int8u 0 = Disable
1 = Enable
17 LensAFStopButton int8u
0 = AF stop
1 = AF start
2 = AE lock while metering
3 = AF point: M->Auto/Auto->ctr
4 = One Shot <-> AI servo
5 = IS start

CanonCustom Functions20D Tags

Tag IDTag Name WritableValues / Notes
0 SetFunctionWhenShooting int8u 0 = Default (no function)
1 = Change quality
2 = Change Parameters
3 = Menu display
4 = Image replay
1 LongExposureNoiseReduction int8u 0 = Off
1 = On
2 FlashSyncSpeedAv int8u 0 = Auto
1 = 1/250 Fixed
3 Shutter-AELock int8u 0 = AF/AE lock
1 = AE lock/AF
2 = AF/AF lock, No AE lock
3 = AE/AF, No AE lock
4 AFAssistBeam int8u 0 = Emits
1 = Does not emit
2 = Only ext. flash emits
5 ExposureLevelIncrements int8u 0 = 1/3 Stop
1 = 1/2 Stop
6 FlashFiring int8u 0 = Fires
1 = Does not fire
7 ISOExpansion int8u 0 = Off
1 = On
8 AEBSequenceAutoCancel int8u 0 = 0,-,+/Enabled
1 = 0,-,+/Disabled
2 = -,0,+/Enabled
3 = -,0,+/Disabled
9 SuperimposedDisplay int8u 0 = On
1 = Off
10 MenuButtonDisplayPosition int8u 0 = Previous (top if power off)
1 = Previous
2 = Top
11 MirrorLockup int8u 0 = Disable
1 = Enable
12 AFPointSelectionMethod int8u 0 = Normal
1 = Multi-controller direct
2 = Quick Control Dial direct
13 ETTLII int8u 0 = Evaluative
1 = Average
14 ShutterCurtainSync int8u 0 = 1st-curtain sync
1 = 2nd-curtain sync
15 SafetyShiftInAvOrTv int8u 0 = Disable
1 = Enable
16 LensAFStopButton int8u
0 = AF stop
1 = AF start
2 = AE lock while metering
3 = AF point: M -> Auto / Auto -> Ctr.
4 = ONE SHOT <-> AI SERVO
5 = IS start
17 AddOriginalDecisionData int8u 0 = Off
1 = On

CanonCustom Functions30D Tags

Tag IDTag Name WritableValues / Notes
1 SetFunctionWhenShooting int8u 0 = Default (no function)
1 = Change quality
2 = Change Picture Style
3 = Menu display
4 = Image replay
2 LongExposureNoiseReduction int8u 0 = Off
1 = Auto
2 = On
3 FlashSyncSpeedAv int8u 0 = Auto
1 = 1/250 Fixed
4 Shutter-AELock int8u 0 = AF/AE lock
1 = AE lock/AF
2 = AF/AF lock, No AE lock
3 = AE/AF, No AE lock
5 AFAssistBeam int8u 0 = Emits
1 = Does not emit
2 = Only ext. flash emits
6 ExposureLevelIncrements int8u 0 = 1/3 Stop
1 = 1/2 Stop
7 FlashFiring int8u 0 = Fires
1 = Does not fire
8 ISOExpansion int8u 0 = Off
1 = On
9 AEBSequenceAutoCancel int8u 0 = 0,-,+/Enabled
1 = 0,-,+/Disabled
2 = -,0,+/Enabled
3 = -,0,+/Disabled
10 SuperimposedDisplay int8u 0 = On
1 = Off
11 MenuButtonDisplayPosition int8u 0 = Previous (top if power off)
1 = Previous
2 = Top
12 MirrorLockup int8u 0 = Disable
1 = Enable
13 AFPointSelectionMethod int8u 0 = Normal
1 = Multi-controller direct
2 = Quick Control Dial direct
14 ETTLII int8u 0 = Evaluative
1 = Average
15 ShutterCurtainSync int8u 0 = 1st-curtain sync
1 = 2nd-curtain sync
16 SafetyShiftInAvOrTv int8u 0 = Disable
1 = Enable
17 MagnifiedView int8u 0 = Image playback only
1 = Image review and playback
18 LensAFStopButton int8u
0 = AF stop
1 = AF start
2 = AE lock while metering
3 = AF point: M -> Auto / Auto -> Ctr.
4 = ONE SHOT <-> AI SERVO
5 = IS start
19 AddOriginalDecisionData int8u 0 = Off
1 = On

CanonCustom Functions350D Tags

Tag IDTag Name WritableValues / Notes
0 SetButtonCrossKeysFunc int8u 0 = Normal
1 = Set: Quality
2 = Set: Parameter
3 = Set: Playback
4 = Cross keys: AF point select
1 LongExposureNoiseReduction int8u 0 = Off
1 = On
2 FlashSyncSpeedAv int8u 0 = Auto
1 = 1/200 Fixed
3 Shutter-AELock int8u 0 = AF/AE lock
1 = AE lock/AF
2 = AF/AF lock, No AE lock
3 = AE/AF, No AE lock
4 AFAssistBeam int8u 0 = Emits
1 = Does not emit
2 = Only ext. flash emits
5 ExposureLevelIncrements int8u 0 = 1/3 Stop
1 = 1/2 Stop
6 MirrorLockup int8u 0 = Disable
1 = Enable
7 ETTLII int8u 0 = Evaluative
1 = Average
8 ShutterCurtainSync int8u 0 = 1st-curtain sync
1 = 2nd-curtain sync

CanonCustom Functions400D Tags

Tag IDTag Name WritableValues / Notes
0 SetButtonCrossKeysFunc int8u 0 = Set: Picture Style
1 = Set: Quality
2 = Set: Flash Exposure Comp
3 = Set: Playback
4 = Cross keys: AF point select
1 LongExposureNoiseReduction int8u 0 = Off
1 = Auto
2 = On
2 FlashSyncSpeedAv int8u 0 = Auto
1 = 1/200 Fixed
3 Shutter-AELock int8u 0 = AF/AE lock
1 = AE lock/AF
2 = AF/AF lock, No AE lock
3 = AE/AF, No AE lock
4 AFAssistBeam int8u 0 = Emits
1 = Does not emit
2 = Only ext. flash emits
5 ExposureLevelIncrements int8u 0 = 1/3 Stop
1 = 1/2 Stop
6 MirrorLockup int8u 0 = Disable
1 = Enable
7 ETTLII int8u 0 = Evaluative
1 = Average
8 ShutterCurtainSync int8u 0 = 1st-curtain sync
1 = 2nd-curtain sync
9 MagnifiedView int8u 0 = Image playback only
1 = Image review and playback
10 LCDDisplayAtPowerOn int8u 0 = Display
1 = Retain power off status

CanonCustom FunctionsD30 Tags

Custom functions for the EOS D30 and D60.

Tag IDTag Name WritableValues / Notes
1 LongExposureNoiseReduction int8u 0 = Off
1 = On
2 Shutter-AELock int8u 0 = AF/AE lock
1 = AE lock/AF
2 = AF/AF lock
3 = AE+release/AE+AF
3 MirrorLockup int8u 0 = Disable
1 = Enable
4 ExposureLevelIncrements int8u 0 = 1/2 Stop
1 = 1/3 Stop
5 AFAssist int8u 0 = Emits/Fires
1 = Does not emit/Fires
2 = Only ext. flash emits/Fires
3 = Emits/Does not fire
6 FlashSyncSpeedAv int8u 0 = Auto
1 = 1/200 Fixed
7 AEBSequenceAutoCancel int8u 0 = 0,-,+/Enabled
1 = 0,-,+/Disabled
2 = -,0,+/Enabled
3 = -,0,+/Disabled
8 ShutterCurtainSync int8u 0 = 1st-curtain sync
1 = 2nd-curtain sync
9 LensAFStopButton int8u 0 = AF Stop
1 = Operate AF
2 = Lock AE and start timer
10 FillFlashAutoReduction int8u 0 = Enable
1 = Disable
11 MenuButtonReturn int8u 0 = Top
1 = Previous (volatile)
2 = Previous
12 SetButtonWhenShooting int8u 0 = Default (no function)
1 = Image quality
2 = Change ISO speed
3 = Change parameters
13 SensorCleaning int8u 0 = Disable
1 = Enable
14 SuperimposedDisplay int8u 0 = On
1 = Off
15 ShutterReleaseNoCFCard int8u 0 = Yes
1 = No

CanonCustom FuncsUnknown Tags

Tag IDTag Name WritableValues / Notes
[no tags known]

CanonCustom PersonalFuncs Tags

Personal function settings for the EOS-1D.

Index2Tag Name WritableValues / Notes
1 PF0CustomFuncRegistration int16u  
2 PF1DisableShootingModes int16u  
3 PF2DisableMeteringModes int16u  
4 PF3ManualExposureMetering int16u  
5 PF4ExposureTimeLimits int16u  
6 PF5ApertureLimits int16u  
7 PF6PresetShootingModes int16u  
8 PF7BracketContinuousShoot int16u  
9 PF8SetBracketShots int16u  
10 PF9ChangeBracketSequence int16u  
11 PF10RetainProgramShift int16u  
14 PF13DrivePriority int16u  
15 PF14DisableFocusSearch int16u  
16 PF15DisableAFAssistBeam int16u  
17 PF16AutoFocusPointShoot int16u  
18 PF17DisableAFPointSel int16u  
19 PF18EnableAutoAFPointSel int16u  
20 PF19ContinuousShootSpeed int16u  
21 PF20LimitContinousShots int16u  
22 PF21EnableQuietOperation int16u  
24 PF23SetTimerLengths int16u  
25 PF24LightLCDDuringBulb int16u  
26 PF25DefaultClearSettings int16u  
27 PF26ShortenReleaseLag int16u  
28 PF27ReverseDialRotation int16u  
29 PF28NoQuickDialExpComp int16u  
30 PF29QuickDialSwitchOff int16u  
31 PF30EnlargementMode int16u  
32 PF31OriginalDecisionData int16u  

CanonCustom PersonalFuncValues Tags

Index2Tag Name WritableValues / Notes
1 PF1Value int16u  
2 PF2Value int16u  
3 PF3Value int16u  
4 PF4ExposureTimeMin int16u  
5 PF4ExposureTimeMax int16u  
6 PF5ApertureMin int16u  
7 PF5ApertureMax int16u  
8 PF8BracketShots int16u  
9 PF19ShootingSpeedLow int16u  
10 PF19ShootingSpeedHigh int16u  
11 PF20MaxContinousShots int16u  
12 PF23ShutterButtonTime int16u  
13 PF23FELockTime int16u  
14 PF23PostReleaseTime int16u  
15 PF25AEMode int16u  
16 PF25MeteringMode int16u  
17 PF25DriveMode int16u  
18 PF25AFMode int16u  
19 PF25AFPointSel int16u  
20 PF25ImageSize int16u  
21 PF25WBMode int16u  
22 PF25Parameters int16u  
23 PF25ColorMatrix int16u  
24 PF27Value int16u  

CanonCustom Functions2 Tags

Beginning with the EOS 1D Mark III, Canon finally created a set of custom function tags which are (reasonably) consistent across models. The EOS 1D Mark III has 57 custom function tags divided into four main groups: 1. Exposure (0x0101-0x010f), 2. Image (0x0201-0x0203), Flash Exposure (0x0304-0x0306) and Display (0x0407-0x0409), 3. Auto Focus (0x0501-0x050e) and Drive (0x060f-0x0611), and 4. Operation (0x0701-0x070a) and Others (0x080b-0x0810). The table below lists tags used by the EOS 1D Mark III, as well as newer tags and values added by later models.

Tag IDTag Name WritableValues / Notes
0x0101 ExposureLevelIncrements int32s (1DmkIII and 1DmkIV)
0 = 1/3-stop set, 1/3-stop comp.
1 = 1-stop set, 1/3-stop comp.
2 = 1/2-stop set, 1/2-stop comp.
(other models)
0 = 1/3 Stop
1 = 1/2 Stop
0x0102 ISOSpeedIncrements int32s 0 = 1/3 Stop
1 = 1 Stop
0x0103 ISOSpeedRange
ISOExpansion
int32s[3]
int32s
(1DmkIII and 1DmkIV)
[Value 0]
0 = Disable
1 = Enable
(other models)
0 = Off
1 = On
0x0104 AEBAutoCancel int32s 0 = On
1 = Off
0x0105 AEBSequence int32s (value of 2 not used by 40D, 50D, 60D, 5DmkII and 7D)
0 = 0,-,+
1 = -,0,+
2 = +,0,-
0x0106 AEBShotCount
AEBShotCount
int32s
int32s[2]
(EOS 90D)
2 = 2 shots
3 = 3 shots
5 = 5 shots
7 = 7 shots
(other models storing a single value)
0 = 3 shots
1 = 2 shots
2 = 5 shots
3 = 7 shots
(models storing two values)
'2 1' = 2 shots
'3 0' = 3 shots
'5 2' = 5 shots
'7 3' = 7 shots
0x0107 SpotMeterLinkToAFPoint int32s 0 = Disable (use center AF point)
1 = Enable (use active AF point)
0x0108 SafetyShift int32s (value of 2 not used by some models)
0 = Disable
1 = Enable (Tv/Av)
2 = Enable (ISO speed)
0x0109 UsableShootingModes
UsableShootingModes
int32s
int32s[2]
[Value 0]
0 = Disable
1 = Enable
0x010a UsableMeteringModes
UsableMeteringModes
int32s
int32s[2]
[Value 0]
0 = Disable
1 = Enable
0x010b ExposureModeInManual int32s 0 = Specified metering mode
1 = Evaluative metering
2 = Partial metering
3 = Spot metering
4 = Center-weighted average
0x010c ShutterSpeedRange
ShutterSpeedRange
int32s[3]
int32s[4]
[Value 0]
0 = Disable
1 = Enable
0x010d ApertureRange
ApertureRange
int32s[3]
int32s[4]
[Value 0]
0 = Disable
1 = Enable
0x010e ApplyShootingMeteringMode int32s[8] [Value 0]
0 = Disable
1 = Enable
0x010f FlashSyncSpeedAv int32s (40D and 1Ds Mark III)
0 = Auto
1 = 1/250 Fixed
(50D, 60D and 7D)
0 = Auto
1 = 1/250-1/60 Auto
2 = 1/250 Fixed
(450D and 1000D)
0 = Auto
1 = 1/200 Fixed
(1D Mark III and 1Ds Mark III)
0 = Auto
1 = 1/300 Fixed
(1D Mark IV)
0 = Auto
1 = 1/300-1/60 Auto
2 = 1/300 Fixed
(5D Mark II, 5D Mark III, 500D, 550D, 600D and 1100D)
0 = Auto
1 = 1/200-1/60 Auto
2 = 1/200 Fixed
0x0110 AEMicroadjustment int32s[3] [Value 0]
0 = Disable
1 = Enable
0x0111 FEMicroadjustment int32s[3] [Value 0]
0 = Disable
1 = Enable
0x0112 SameExposureForNewAperture int32s 0 = Disable
1 = ISO Speed
2 = Shutter Speed
(EOS R)
0 = Disable
1 = ISO Speed
2 = ISO Speed/Shutter Speed
3 = Shutter Speed
0x0113 ExposureCompAutoCancel int32s 0 = Enable
1 = Disable
0x0114 AELockMeterModeAfterFocus int32s Bit 0 = Evaluative
Bit 1 = Partial
Bit 2 = Spot
Bit 3 = Center-weighted
0x0201 LongExposureNoiseReduction int32s 0 = Off
1 = Auto
2 = On
0x0202 HighISONoiseReduction int32s (50D, 60D, 500D, 550D, 600D, 1100D, 5DmkII and 7D)
0 = Standard
1 = Low
2 = Strong
3 = Off
(other models)
0 = Off
1 = On
0x0203 HighlightTonePriority int32s 0 = Disable
1 = Enable
0x0204 AutoLightingOptimizer int32s (50D, 500D, 5DmkII and 1DmkIV)
0 = Standard
1 = Low
2 = Strong
3 = Disable
(other models)
0 = Enable
1 = Disable
0x0304 ETTLII int32s 0 = Evaluative
1 = Average
0x0305 ShutterCurtainSync int32s 0 = 1st-curtain sync
1 = 2nd-curtain sync
0x0306 FlashFiring int32s 0 = Fires
1 = Does not fire
0x0407 ViewInfoDuringExposure int32s 0 = Disable
1 = Enable
0x0408 LCDIlluminationDuringBulb int32s 0 = Off
1 = On
0x0409 InfoButtonWhenShooting int32s (1D Mark III)
0 = Displays camera settings
1 = Displays shooting functions
(1D Mark IV)
0 = Displays shooting functions
1 = Displays camera settings
0x040a ViewfinderWarnings int32s
Bit 0 = Monochrome
Bit 1 = WB corrected
Bit 2 = One-touch image quality
Bit 3 = ISO expansion
Bit 4 = Spot metering
Bit 6 = Noise reduction
Bit 7 = HDR
0x040b LVShootingAreaDisplay int32s 0 = Masked
1 = Outlined
0x040c LVShootingAreaDisplay int32s 0 = Masked
1 = Outlined
0x0501 USMLensElectronicMF int32s 0 = Enable after one-shot AF
1 = Disable after one-shot AF
2 = Disable in AF mode
0x0502 AIServoTrackingSensitivity int32s -2 = Slow
-1 = Medium Slow
0 = Standard
1 = Medium Fast
2 = Fast
0x0503 AIServoImagePriority int32s 0 = 1: AF, 2: Tracking
1 = 1: AF, 2: Drive speed
2 = 1: Release, 2: Drive speed
3 = 1: Release, 2: Tracking
0x0504 AIServoTrackingMethod int32s 0 = Main focus point priority
1 = Continuous AF track priority
0x0505 LensDriveNoAF int32s 0 = Focus search on
1 = Focus search off
0x0506 LensAFStopButton int32s (value of 6 not used by 40D, 50D and 5DmkII)
0 = AF stop
1 = AF start
2 = AE lock
3 = AF point: M->Auto/Auto->ctr
4 = One Shot <-> AI servo
5 = IS start
6 = Switch to registered AF point
7 = Spot AF
0x0507 AFMicroadjustment int32s[5] [Value 0]
0 = Disable
1 = Adjust all by same amount
2 = Adjust by lens
0x0508 AFPointAreaExpansion int32s (5D Mark II)
0 = Disable
1 = Enable
(1Ds Mark III)
0 = Disable
1 = Enable (left/right Assist AF points)
2 = Enable (surrounding Assist AF points)
(other models)
0 = Disable
1 = Left/right AF points
2 = Surrounding AF points
3 = All 45 points area
0x0509 SelectableAFPoint int32s (1D Mark IV)
0 = 45 points
1 = 19 points
2 = 11 points
3 = Inner 9 points
4 = Outer 9 points
(other models)
0 = 19 points
1 = Inner 9 points
2 = Outer 9 points
3 = 19 Points, Multi-controller selectable
4 = Inner 9 Points, Multi-controller selectable
5 = Outer 9 Points, Multi-controller selectable
0x050a SwitchToRegisteredAFPoint int32s (1D Mark IV)
0 = Disable
1 = Switch with multi-controller
2 = Only while AEL is pressed
(other models)
0 = Disable
1 = Enable
0x050b AFPointAutoSelection int32s 0 = Control-direct:disable/Main:enable
1 = Control-direct:disable/Main:disable
2 = Control-direct:enable/Main:enable
0x050c AFPointDisplayDuringFocus int32s (1D models)
0 = On
1 = Off
2 = On (when focus achieved)
(other models)
0 = Selected (constant)
1 = All (constant)
2 = Selected (pre-AF, focused)
3 = Selected (focused)
4 = Disable display
0x050d AFPointBrightness int32s 0 = Normal
1 = Brighter
0x050e AFAssistBeam int32s (1D Mark IV and 6D)
0 = Emits
1 = Does not emit
2 = IR AF assist beam only
(other models; values 2-3 not used by 1DmkIII or 5DmkII, value 3 new for 7D)
0 = Emits
1 = Does not emit
2 = Only ext. flash emits
3 = IR AF assist beam only
0x050f AFPointSelectionMethod int32s (40D, 50D and 5DmkII)
0 = Normal
1 = Multi-controller direct
2 = Quick Control Dial direct
(60D)
0 = AF point button: Activate AF Sel; Rear dial: Select AF points
1 = AF point button: Auto selection; Rear dial: Manual selection
0x0510 VFDisplayIllumination
SuperimposedDisplay
int32s
int32s
(7D)
0 = Auto
1 = Enable
2 = Disable
(other models)
0 = On
1 = Off
0x0511 AFDuringLiveView int32s (40D)
0 = Disable
1 = Enable
(450D and 1000D)
0 = Disable
1 = Quick mode
2 = Live mode
0x0512 SelectAFAreaSelectMode int32s [Value 0]
0 = Disable
1 = Enable
2 = Register
3 = Select AF-modes
0x0513 ManualAFPointSelectPattern int32s 0 = Stops at AF area edges
1 = Continuous
0x0514 DisplayAllAFPoints int32s 0 = Enable
1 = Disable
0x0515 FocusDisplayAIServoAndMF int32s 0 = Enable
1 = Disable
0x0516 OrientationLinkedAFPoint int32s 0 = Same for vertical and horizontal
1 = Select different AF points
0x0517 MultiControllerWhileMetering int32s 0 = Off
1 = AF point selection
0x0518 AccelerationTracking int32s  
0x0519 AIServoFirstImagePriority int32s -1 = Release priority
0 = Equal priority
1 = Focus priority
0x051a AIServoSecondImagePriority int32s -1 = Shooting speed priority
0 = Equal priority
1 = Focus priority
0x051b AFAreaSelectMethod int32s 0 = AF area selection button
1 = Main dial
0x051c AutoAFPointColorTracking int32s 0 = On-Shot AF only
1 = Disable
0x051d VFDisplayIllumination int32s [Value 0]
0 = Auto
1 = Enable
2 = Disable
[Value 1]
0 = Non-illuminated
1 = Illuminated
0x051e InitialAFPointAIServoAF int32s 0 = Auto
1 = Initial AF point selected
2 = Manual AF point
0x060f MirrorLockup int32s (value of 2 not used by some models)
0 = Disable
1 = Enable
2 = Enable: Down with Set
0x0610 ContinuousShootingSpeed
ContinuousShootingSpeed
ContinuousShootingSpeed
int32s[6]
int32s[5]
int32s[3]
[Value 0]
0 = Disable
1 = Enable
[Value 0]
0 = Disable
1 = Enable
0x0611 ContinuousShotLimit int32s[2] [Value 0]
0 = Disable
1 = Enable
0x0612 RestrictDriveModes
RestrictDriveModes
int32s
int32s[2]
[Value 0]
0 = Disable
1 = Enable
0x0701 Shutter-AELock
AFAndMeteringButtons
ShutterButtonAFOnButton
int32s
int32s
int32s
(500D, 550D, 600D, 1000D and 1100D)
0 = AF/AE lock
1 = AE lock/AF
2 = AF/AF lock, No AE lock
3 = AE/AF, No AE lock
(250D)
'0 0' = AF/AE lock
'1 0' = AE lock/AF
'2 0' = AF/AF lock, No AE lock
'3 0' = AE/AF, No AE lock
(60D)
0 = Metering start
1 = Metering + AF start
2 = AE lock
3 = AF stop
4 = No function
(other models)
0 = Metering + AF start
1 = Metering + AF start/AF stop
2 = Metering start/Meter + AF start
3 = AE lock/Metering + AF start
4 = Metering + AF start/disable
0x0702 AFOnAELockButtonSwitch int32s 0 = Disable
1 = Enable
0x0703 QuickControlDialInMeter int32s 0 = Exposure comp/Aperture
1 = AF point selection
2 = ISO speed
3 = AF point selection swapped with Exposure comp
4 = ISO speed swapped with Exposure comp
0x0704 SetButtonWhenShooting int32s (40D, 50D and 5DmkII; value of 5 is new for 50D, and 6 is new for 5DmkII)
0 = Normal (disabled)
1 = Image quality
2 = Picture style
3 = Menu display
4 = Image playback
5 = Quick control screen
6 = Record movie (Live View)
(60D)
0 = Normal (disabled)
1 = Image quality
2 = Picture style
3 = White balance
4 = Flash exposure compensation
5 = Viewfinder leveling gauge
(450D, 550D and 600D; value of 5 is new for 550D)
0 = Normal (disabled)
1 = Image quality
2 = Flash exposure compensation
3 = LCD monitor On/Off
4 = Menu display
5 = ISO speed
(1100D)
0 = Normal (disabled)
1 = Image quality
2 = Flash exposure compensation
3 = LCD monitor On/Off
4 = Menu display
5 = Depth-of-field preview
(1000D)
0 = LCD monitor On/Off
1 = Image quality
2 = Flash exposure compensation
3 = Menu display
4 = Disabled
(500D)
0 = Quick control screen
1 = Image quality
2 = Flash exposure compensation
3 = LCD monitor On/Off
4 = Menu display
5 = Disabled
(250D)
(1DmkIII and 1DmkIV)
0 = Normal (disabled)
1 = White balance
2 = Image size
3 = ISO speed
4 = Picture style
5 = Record func. + media/folder
6 = Menu display
7 = Image playback
0x0705 ManualTv int32s 0 = Tv=Main/Av=Control
1 = Tv=Control/Av=Main
0x0706 DialDirectionTvAv int32s 0 = Normal
1 = Reversed
0x0707 AvSettingWithoutLens int32s 0 = Disable
1 = Enable
0x0708 WBMediaImageSizeSetting int32s 0 = Rear LCD panel
1 = LCD monitor
2 = Off (disable button)
0x0709 LockMicrophoneButton int32s [Value 0]
0 = Protect (hold:record memo)
1 = Record memo (protect:disable)
2 = Play memo (hold:record memo)
3 = Rating (protect/memo:disable)
0x070a ButtonFunctionControlOff int32s 0 = Normal (enable)
1 = Disable main, Control, Multi-control
0x070b AssignFuncButton int32s 0 = LCD brightness
1 = Image quality
2 = Exposure comp./AEB setting
3 = Image jump with main dial
4 = Live view function settings
0x070c CustomControls int32s  
0x070d StartMovieShooting int32s 0 = Default (from LV)
1 = Quick start (FEL button)
0x070e FlashButtonFunction int32s 0 = Raise built-in flash
1 = ISO speed
0x070f MultiFunctionLock int32s [Value 0]
0 = Off
1 = On
2 = On (quick control dial)
3 = On (main dial and quick control dial)
[Value 1]
Bit 0 = Main dial
Bit 1 = Quick control dial
Bit 2 = Multi-controller
0x0710 TrashButtonFunction int32s 0 = Normal (set center AF point)
1 = Depth-of-field preview
0x0711 ShutterReleaseWithoutLens int32s 0 = Disable
1 = Enable
0x0712 ControlRingRotation int32s 0 = Normal
1 = Reversed
0x0713 FocusRingRotation int32s 0 = Normal
1 = Reversed
0x0714 RFLensMFFocusRingSensitivity int32s 0 = Varies With Rotation Speed
1 = Linked To Rotation Angle
0x0715 CustomizeDials int32s  
0x080b FocusingScreen int32s (40D, 50D and 60D)
0 = Ef-A
1 = Ef-D
2 = Ef-S
(5D Mark II)
0 = Eg-A
1 = Eg-D
2 = Eg-S
(6D)
0 = Eg-A II
1 = Eg-D
2 = Eg-S
(7D Mark II)
0 = Eh-A
1 = Eh-S
(1DX)
0 = Ec-CV
1 = Ec-A,B,D,H,I,L
(1DmkIII, 1DSmkIII and 1DmkIV)
0 = Ec-CIV
1 = Ec-A,B,C,CII,CIII,D,H,I,L
2 = Ec-S
3 = Ec-N,R
0x080c TimerLength
TimerLength
int32s[3]
int32s[4]
[Value 0]
0 = Disable
1 = Enable
0x080d ShortReleaseTimeLag int32s 0 = Disable
1 = Enable
0x080e AddAspectRatioInfo int32s
0 = Off
1 = 6:6
2 = 3:4
3 = 4:5
   4 = 6:7
5 = 10:12
6 = 5:7
0x080f AddOriginalDecisionData int32s 0 = Off
1 = On
0x0810 LiveViewExposureSimulation int32s 0 = Disable (LCD auto adjust)
1 = Enable (simulates exposure)
0x0811 LCDDisplayAtPowerOn int32s 0 = Display
1 = Retain power off status
0x0812 MemoAudioQuality int32s 0 = High (48 kHz)
1 = Low (8 kHz)
0x0813 DefaultEraseOption int32s 0 = Cancel selected
1 = Erase selected
2 = Erase RAW selected
3 = Erase non-RAW selected
0x0814 RetractLensOnPowerOff int32s 0 = Enable
1 = Disable
0x0815 AddIPTCInformation int32s 0 = Disable
1 = Enable
0x0816 AudioCompression int32s 0 = Enable
1 = Disable

(This document generated automatically by Image::ExifTool::BuildTagLookup)
Last revised Dec 20, 2021

<-- ExifTool Tag Names